Archive for March, 2011

How To Repair The 0×0000001 Error

Wednesday, March 23rd, 2011

0×0000001 Error is a type of blue screen error that will typically occur when you are starting up your PC.  This error is indicative of a problem in your system due to some incompatibility issues in asynchronous procedure calls. The thread indexes can also be a source of this error. This tutorial will teach you how you can fix this error in your PC.

What Causes The 0x0000001 Error?

There are a number of factors that can cause this error including registry problems, outdated drivers in your PC, memory issues, a mismatch in the asynchronous procedure calls or thread indexes in your system.

How To Fix 0x0000001 Errors

Step 1 – Make Sure All Your Hardware Is Working Correctly

Check all the hardware in your PC to make sure that they are working properly.  If you experienced the error while you were installing hardware, you need to remove the device.  Also check if your hardware is compatible to your PC’s Windows version.

Step 2 – Update any Out-of-Date Drivers Your PC

Most of the time, this error will be caused by outdated drivers in your PC.  That is why it is important that you update the drivers in your system from time to time.  To accomplish this, follow the steps outlined below.

  • Click on Start then choose Control Panel
  • Select Device Manager then click on Hardware
  • Right click on each of the drivers then choose Properties to check the date.
  • Go to the manufacturer’s online site then check for the latest updates.  Download updates whose date of update is later than that found in the drivers on your PC.
  • Remove the drivers in your PC that have been updated by choosing the Device Manager Window then click Uninstall.

Step 3 – Update Windows

Another reason why you will experience this error on your PC is when your Windows is outdated.  Microsoft regularly comes out with Windows updates that contain fixes that can sort out bugs and errors in your computer.  To install the latest Windows version in your PC follow the steps below.

  • First click on Start
  • Next choose All Programs
  • Select Windows Update
  • Follow the steps in the Update Wizard
  • Restart your PC to refresh settings

Step 4 – Clean Out The Registry

The registry is a little known area in your computer that is prone to errors.  Microsoft made it difficult for users to understand what exactly the registry does since it has a very frail design and can easily get damaged.  On the other hand, it is necessary that you clean out your registry from time to time of unnecessary files since these can easily slow down your computer and lead to errors.  The rule is, the more you use your computer the more files get stored in your registry.  Unfortunately only a fraction of the settings in this sector of your PC is useful and the majority of the files will only serve to slow your PC down.  If you try to remove unnecessary data in your registry yourself, there is a strong likelihood that crucial files may get accidentally deleted.  That is why many experts advise people to use an automated registry cleaner.

How To Repair Error 646 Quickly

Tuesday, March 22nd, 2011

Error 646 is a common Windows problem for Vista users that is associated with Windows Update.  The error generally appears when you try to update Windows using the Windows Update program and the update process was not able to install the updates.  The problem is mainly caused because Windows is not able to process some settings properly or you have not gained the necessary permissions to perform the update on the computer.  You need to resolve the issues surrounding Windows Update to be able to install the necessary updates from Microsoft and prevent the error messages from appearing on your screen.  This tutorial will help you repair error 646 quickly.

What Causes Error 646?

These are the common causes of the error:

  • Internet error on your PC
  • Windows has faulty settings
  • Your PC has some conflicting software

The errors are generated by the system as a result Windows not being able to proceed with the update process.  Windows Update needs a reliable Internet connection to be able to download the updates from the Microsoft website.  You need to be able to identify the issues that prevent Windows Update from completing the update process and fix it efficiently – which can be done using the steps below:

How To Fix Error 646

Step 1 – “Restore” Your PC To An Earlier Date

You can use the “System Restore” feature of Windows to resolve problems with your Windows system.  It is a feature that lets you rollback into an earlier date when your system was working properly.  It can help you resolve problems without losing valuable information.  This important function of Windows can easily be done by users, but is often neglected.  To fix the error 646 using System Restore, follow these steps:

  • Click “Start > All Programs > Accessories > System Tools > System Restore
  • Follow the wizard to restore your PC back to a date before  you could update your PC
  • Choose a date using the calendar picker that you are confident that your system has been working properly
  • Restart your PC when prompted by System Restore

This process will return your system to a state when you last updated your PC.  It is essential that you keep creating restore points every now and then so that your system can later return to this point if a problem occurs.  If the error still occurs after you try this step you should proceed to step 2.

Step 2 – Clean Out The Registry Of Windows

The “registry” is a large and complicated storage depot that contains a huge number of registry keys holding information that pertains to file and program settings.  It is a major Windows component that is needed by the system to function properly. However it keeps on producing errors, largely because Windows loads several hundreds of registry entries at the same time and saves them in the wrong way.  The registry entries easily get damaged or corrupted and Windows is unable to process them.  To be able to repair the error 646, you need to clean out the errors from inside the registry by using a reliable ‘registry cleaner’ application to automatically detect broken registry keys and repair them instantly.

We highly recommend that you get this tool for it has been proven to consistently fix 99% of system errors.

Runtime Error 424 Error

Monday, March 21st, 2011

Runtime Error 424 is a fairly common Windows problem in XP and Vista versions. Basically, this problem is a software programming error. The error appears on your screen if Windows encounters an unexpected error, or if it cannot process a file or setting that it needs to use. The error normally appears when you are using Microsoft Access and you then attempt to use the Microsoft Office Chart Wizard on the data access page.  When the error appears, it prevents you from inserting charts into your Access program.  You need to resolve the issues affecting the chart wizard to be able to insert charts in Access again and resolve the error.  This tutorial will help your fix Runtime error 424 quickly.

What Causes Runtime Error 424?

One of the most likely reasons is that a faulty Microsoft Office installation causes Windows to be unable to process insertion of charts.  The problem comes down to Windows not being able to process the files or settings necessary to perform the operation. It’s likely some files and settings were damaged during the installation.  The problem can also be caused by errors inside the registry – corrupted settings here will have the same effect.  You need to complete a series of steps to identify the source of the problem and then fix it efficiently – which can be done by following the guidelines below:

How To Fix Runtime Error 424

Step 1 – Re-Install The Program Causing The Error

The error is most likely the direct result of one of your programs being damaged. It could be that its files are corrupted, or they may have been misplaced in the wrong folder. Whatever, the chances are that you can fix the problems by simply uninstalling the program and then installing it once more.

  • Click Start
  • Go to Control Panel
  • Select Add/Remove Programs
  • Selecting program from the list and then click the “Remove” or “Uninstall” button
  • Restart your PC first before you insert the CD/DVD installer or running the file installer from your hard drive

Step 2 – Use The “Office Chart Wizard”

Not a direct fix, but if you want to work around the problem, you can use the Office Chart Wizard to insert charts into your Access file as this will remove conflicts with the runtime error.  This can be done by following the steps below:

  1. In a new data access page, select New, and then click OK
  2. Open the Insert menu
  3. Select Office Chart
  4. Whilst in the wizard, select Column found under Chart Type, then click Next
  5. Fill out and change the necessary details for your Chart, click Ok

This process will allow your Office programs to process the various files with charts it needs to run, preventing the error message from showing.  However, this is not a true fix for the error, so it’s recommended that you proceed to the step below.

Step 3 – Clean Out The Registry

If reinstalling the application doesn’t work, then the error must lie in the registry of Windows.  The registry serves as the system’s storage house for all the file and program settings on your computer.  Every program installed on your PC comes with configuration settings that Windows uses to remember how to load your files and programs, but unfortunately these are quite sensitive and can easily get damaged. To fix the runtime error 424, you should clean out the registry of damage by  using a ‘registry cleaner’ program, which works by performing a thorough system scan first, and then repairs all errors detected.  We recommend this tool for your system as it has been found to consistently remove 99% of errors and faults inside the registry and can even help stop viruses from infecting your system.

How To Repair Runtime Error 76

Saturday, March 19th, 2011

Runtime Error 76 is a common Windows error that will be displayed on your screen when your system encounters a file that it cannot read or process properly, which usually happens either because the file has become damaged, gone missing or somehow become unregistered with the Windows operating system.  A common example of this error is when you have installed Microsoft Office in your computer and then the system accidentally removes one of its required components. The next time Windows tries to find the component it, it won’t be able to and as a result it will generate the runtime error 76, displaying the file name that is missing.  You need to repair the error by finding out which file is missing or corrupted, and then take steps to repair it.  This tutorial will help you find a fix for the runtime error 76.

What Causes Runtime Error 76?

The typical error message that shows up on your screen looks like this:

  • “Runtime Error 76: Path Not Found”

The error message is created by the system to let you know that your system has encountered a file that Windows cannot process or locate from its intended directory. This means the file is most likely corrupted or has been misplaced by the system. The problem can also easily be caused by damage to the settings inside the registry. You need to resolve the problem in order to fix the error – follow steps describe next to do so.

How To Fix Runtime Error 76

Step 1 – Re-Install The Application Causing The Errors

To directly tackle the error, the first thing that you need to do is identify the program which is causing the error message to show on your screen.  It’s likely that if you re-install it, the error will stop appearing.  Re-installing will replace the various program files the application is using and grant it fresh, working copies to use.  You need to uninstall the program first, which you can do by following these steps:

  • Click Start
  • Select Run
  • Type “appwiz.cpl” and click OK
  • From the list, select the program and click the “Uninstall” or “Remove” button
  • Restart your PC once the removal is finished

To re-install the program, insert the CD installer or locate and run the file installer from your hard drive. If you can’t find the installer file, you may also be able to download it from the internet. Follow the install wizard to complete the installation.  This process should resolve the problem and fix the runtime 76 error.  However, if the runtime error persists, proceed to the next step.

Step 2 – Clean Out Your PC With A “Registry Cleaner”

A vitally important module in your Windows system known as the registry could be the reason for the error.  It is basically a central database that stores a large number of registry keys that are needed by Windows to retrieve file and program settings. Without these settings, Windows won’t be able to load your programs properly. Unfortunately, the registry often suffers setbacks such as corruption, or misplaced registry keys, and this is when errors occur. Cleaning the registry will almost certainly eliminate the runtime error 76. To do so, you will need to use a ‘registry cleaner’ to do the cleaning for you.  To remove 99% of errors inside the registry, we highly recommend that you use this tool which has been found to be consistent and very versatile in restoring the health of your PC.

How To Fix SteamInstall.msi Error (1316 Error)

Friday, March 18th, 2011

Steam is a popular online game platform that allows the millions of followers to gain access to over 1,100 games inside its community, allowing users to interact with each other within the cyber gaming world.  The installation of Steam commonly encounters errors, such as the SteamInstall.msi error, which can be very frustrating for users who want to install the platform.  The problem shows up when Windows encounters a problematic file or setting that prevents the installation from continuing.  You need to resolve the issues surrounding the SteamInstall.msi error in order to perform a successful installation of the program.  This tutorial can help you fix the problem.

What Causes SteamInstall.msi Errors?

The error usually surfaces when Windows is unable to process the Steam installer properly.  Your computer might have an outdated Windows Installer program that prevents the installation of Steam from finishing. Otherwise, this problem might be due to damage inside the registry.  You need perform a series of repair steps to resolve the problem – read on to find out how to do that.

How To Fix SteamInstall.msi Errors

Step 1 – Make Sure You Have The Latest Version Of Windows Installer

The first thing that you need to do to resolve the problem is ensure that you have the latest version of Windows Installer in your PC.  You can download the latest Windows Installer from the Microsoft website or through this link.  The Microsoft Windows Installer or MSI is the service that handles all your application installations and configurations.  Currently, the latest version is labelled as 4.5 redistributable.

Step 2 – Use The “Windows Installer Cleanup Utility”

The error can be caused by a previously incomplete installation of Steam.  To fix the problem, run Windows Installer Cleanup Utility to remove the Steam installation files.  You can download Windows Installer Cleanup Utility from here.  Follow these directions after you have installed it onto your system:

  1. Click Start > Windows Installer Cleanup Utility
  2. Select Steam from the list.
  3. Click Remove and then click OK.
  4. Restart your computer.
  5. Once Windows resumes, re-install Steam by using the Steam installer

Step 3 – Clean Out The Registry

The registry in your PC is a large database that Windows use to store configuration settings for programs installed on your computer. While it’s obviously an essential component, it is not without problems, due to its sensitive composition, and when problems occur here it can lead to all sorts of errors. The problem is that the registry often gets corrupted settings inside it, and when that happens you will need to clear these up. You can manually repair the registry, but this is not advisable for inexperienced users as it is dangerous for your system and can be quite a daunting process that involves knowing the right registry keys and the appropriate values for each key.  More advisable is to use a “registry cleaner” application to automatically repair broken registry keys.  We highly recommend that you download and install this tool for it has been proven to remove 99% of errors and correct system faults enabling your PC to run fast again.